021 6331856   

 

 

A3+ PET SHEET

NovaJetTM Laser Matte Translucent 135 DS hp indigo

Colour laser printable non-tear media for photo realistic prints

Product Description & Application

NovaJet Laser Matte Translucent 135 DS (LMT 5105) is a PET film specially coated on both sides with translucent toner receptive coating. It is suitable for high quality photo jobs on translucent surface, visiting cards, indoor signage, invitation cards and various other commercial applications.

Features & Benefits

  • PET film base provides tear resistance, stiffness, thermal stability for long term durability
  • Outstanding toner & ink adhesion for sharp and high definition images
  • Thermally stable PET film base allows thermal lamination
  • PET Film substrate provides excellent weather ability
  • Good antistatic properties for dust-free outputs and trouble free printing
  • Imaged sheets when thermally laminated with gloss lamination film on both side, becomes clear transparent film

Product Specifications

  • Base                         : Polyester Film
  • Total Thickness      : 135 ± 5 microns (185 ± 10 gsm)
  • Surface Finish        : Translucent
  • Shelf-life                 : Two years from the date of packing when stored in original packing at 20-25oC and 55% ± 10 RH
  • Sizes Available       : 320 mm x 480 mm
  • Packing                   : 100 Sheets / Pack

Printer Compatibility & Settings Chart

 Company            Model
 HP  Indigo 3500, Indigo 5500, Indigo 5600, Indigo 7500 & Indigo 7600     
 Konica Minolta         
 C 6000 / C 8000 / C70HC / Bizhub Pro C6501 / Bizhub Pro C6500
 Canon  C6000 AP / C 7000 VP
 MGI  MGI METEOR DP8700XL & MGI METEOR DP60 PRO
 Ricoh  Pro C751
 Xerox  770, 1000

Tested with original toners on above machines.

  • Certification : HP Indigo, Konica Minolta and Oki approved media

Usage Instructions

  • Kindly refer to your printer user guide for instructions on appropriate printer settings
  • We recommend thorough testing of the material in its intended application prior to use
  • For best output & media settings in printer, it is recommended to involve service engineer of printer manufacturer who will do the correct & desired setting to get optimum imaging result
  • Please ensure the sheets are conditioned to the printing environment for 24 hours before use in the room where it is intended to be printed
  • To facilitate jam-free feeding, fan the required number of sheets
  • Best print results can be obtained at 20 - 25°C, 55 +10% RH with original toners
  • Please ensure proper earthing of the machine
  • Lamination after printing is advisable for extended print life. The lamination film must be checked for compatibility with the media
  • Proof the Job on low cost paper of same size before printing final impressions on the film
  • The durability of the printed images will depend on the fading characteristics of the toner used. Please consult with toner manufacturer for technical advice.

Handling & Storage Instructions

  • Hold the media by the edges. Fingerprints will affect the quality of the image. A fresh pair of cotton gloves should be used while handling bare media to avoid sweat, grease and oil transfer on to the media that could interfere with the print quality.
  • Store the media in cool, dry place (20-25oC, 55% ±10 RH) away from direct sunlight. When not in use, the media should be stored in its original packing
  • Store the media in flat position, to avoid curling.
  • Disclaimer: - - The information provided in this document us to be used only as guide. It does not imply any liability and shall not be binding upon the company. In pursuit of constant product improvement, specifications are subject to change without prior notice.